WATER REMOVER AQUA SOCK

AQUA SOCK AQ12&AQ28

Aqua Sock AQ12 Fuel Tank Water Remover 12oz

The Aqua Sock AQ12 is the simple solution to removing water from your fuel tank, whether it's an onboard fuel tank, static refuelling tank, fuel bowser, or even a central heating fuel.

• Simply remove the AquaSock from it's packaging.
• Secure the string tightly to the eyelet.
• Find the best access hole to the bottom of the tank, avoiding sharp edges!
• Do not put AquaSock AQ12 in a hole of less than 35mm (1-3/8", 1.375")
• Put the AquaSock in the tank, ensuring that it touches the bottom of the tank.
• DO NOT put the string in the tank - you will need that to get the AquaSock out of the tank.
• Leave the AquaSock to sit in the tank for a minimum of 24 hours.
  (Do not let it sit in the tank for more than 72 hours)
• Remove the Aqua Sock from the tank and dispose of according to local laws.
• Start the engine and check the filter for water.
• Each AQ12 Aqua Sock will take out up to 12 ounces of water in one go, ideal for regular treatment. If you have a lot of water in the tank, it may take more than one AquaSock or an alternative method to remove it.

The technology that powers the AquaSock is a special water-removing chemical that is contained in a weighted, sock-like bag. The bag has been designed to be inserted into the fuel tank via an access plate (located on the fuel tank) or the fuel gauge sender. The sock will come to rest on the tank bottom where water collects when the boat is not in motion. After 24 hours, the AquaSock will complete its job. Just use the retrieval string provided to remove the gel filled sock.

Aqua Sock AQ28 Fuel Tank Water Remover 28oz

The Aqua Sock AQ28 is the simple solution to removing water from your fuel tank, whether it's an onboard fuel tank, static refuelling tank, fuel bowser, or even a central heating fuel.

• Simply remove the AquaSock from it's packaging.
• Secure the string tightly to the eyelet.
• Find the best access hole to the bottom of the tank, avoiding sharp edges!
• Do not put Aquasock AQ28 in a hole of less than 64mm (2-1/2", 2.5")
• Put the AquaSock in the tank, ensuring that it touches the bottom of the tank.
• DO NOT put the string in the tank - you will need that to get the AquaSock out of the tank.
• Leave the AquaSock to sit in the tank for a minimum of 24 hours.
  (Do not let it sit in the tank for more than 72 hours)
• Remove the Aqua Sock from the tank and dispose of according to local laws.
• Start the engine and check the filter for water.
• Each AQ28 Aqua Sock will take out up to 28 ounces of water in one go, ideal for regular treatment (approx 0.836 ltrs)
• If you have a lot of water in the tank, it may take more than one AquaSock or an alternative method to remove it.

 ALSO YOU CAN FIND AQ 40 & AQ 85

HOW IT WORKS

The technology that powers the AquaSock is a special water-removing chemical that is contained in a weighted, sock-like bag. The bag has been designed to be inserted into the fuel tank via an access plate (located on the fuel tank) or the fuel gauge sender. The sock will come to rest on the tank bottom where water collects when the boat is not in motion. After 24 hours, the AquaSock will complete its job. Just use the retrieval string provided to remove the gel filled sock.

 ί .....